HORIZON FORMWORK CO., LTD.
HORIZON FORMWORK CO., LTD. Professional manufacturer of formwork and scaffolding systems
Add to Cart
Water Barrier Combined with Formwork Tie Rod, Used in Water Retaining Structure
Water barriers are used in water retaining structures. Cast into the concrete wall between two separate tie bars. After pouring, tie rods are removed, the water barrier remains in situ. Allow two reducers per water barrier.
This type of water barrier is made from cast iron as one unit, which is the most cost-effective solution. To prevent the entering of concrete grout, a reducing sleeve will be installed at the transition from the water stop nut to the plastic tube.
This water barrier is designed with round sheet Ø 65 mm, for tie rod 15 mm and 20mm.
| Part Name | Specification | Weight (kg) | Remark |
| Tie-rod | D15 | 1.52 kg/m | L=6m; |
| Wing nut | D15 | 0.35 | For tie-rod D15 / D20 |
| Super plate | D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
| 3-lug wing nut | D15 | 0.97 | For tie-rod D15; |
| Waling plate | 120 x 120 x 6, Φ19 | 0.65 | For tie-rod and nut D15; |
| Water stopper | D15 | 0.55 | Used in water resistant wall; |
| Anchor plate | D20 | 0.95 | Embedded in concrete as lost part |
