HORIZON FORMWORK CO., LTD.
HORIZON FORMWORK CO., LTD. Professional manufacturer of formwork and scaffolding systems
Add to Cart
Flanged Wing Nut Ideal for Use with Steel Walings in Wall Formwork System
The Flanged Wing Nut is available in different diameters. With a larger pedestal, it allows a direct load bearing on walings.
It can be screwed on or loosened using a hexagon wrench, thread bar or hammer.
Formwork wing nut with flange:
| Flanged Wing nut | Bar Ø (mm) | Plate dia (mm) | Height/Hex. (mm) | Weight (Kg) |
 | 15 | 90 | 55/27 | 0.50 |
| 15 | 100 | 55/27 | 0.62 | |
| 15 | 110 | 55/27 | 0.80 | |
| 20 | 120 | 60/36 | 1.00 |
| Part Name | Specification | Weight (kg) | Remark |
Tie-rod | D15 | 1.5 kg/m | L=6m; |
Super plate | D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
3-lug wing nut | D15 | 0.97 | For tie-rod D15; |
Waling plate | 120 x 120 x 6, Φ19 | 0.65 | For tie-rod and nut D15; |
Water stopper | D15 | 0.55 | Used in water resistant wall; |
Anchor plate | D20 | 0.95 | Embedded in concrete as lost part |