HORIZON FORMWORK CO., LTD.
HORIZON FORMWORK CO., LTD. Professional manufacturer of formwork and scaffolding systems
Add to Cart
Formwork Tie rod With Water Barrier Nut Used in Water Retaining Structures
Water barriers are used in water retaining structures, casted into the concrete wall between two separate tie bars, to prevent water seeping alongside the thread bar. After pouring concrete, tie rods are removed, the water barrier remains in concrete.
| Item No. | Bar dia (mm) | Length(mm) | Plate/Spigot (mm) | Weight (Kg) |
| WS-15A | 15 | 110 | 60/26 | 0.44 |
| WS-15B | 15 | 110 | 65/26 | 0.56 |
| WS-15C | 15 | 130 | 110/26 | 0.96 |
| WS-20 | 20 | 160 | 80/31 | 1.26 |
The spigot size for tubes inner dia 26mm or 31mm.
Material: Ductile casting, Galvanized
Besides the above specifications, customerized sizes available upon drawing or samples.
| Part Name | Specification | Weight (kg) | Remark |
| Tie-rod
| D15 D20 | 1.52 kg/m 2.71 kg/m | L=6m; Special length available upon request. |
| Wing nut
| D15 D20 | 0.35 0.70 | For tie-rod D15 / D20 |
| Super plate
| D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
| 3-lug wing nut
| D15 D20 | 0.97 0.78 | For tie-rod D15; For tie-rod D20 |
| Waling plate
| 120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 | 0.65 0.85 | For tie-rod and nut D15; galvanized |
| Water stopper
| D15 D20 | 0.55 0.72 | Used in water resistant wall; With tie-rod D15 / D20 |
| Anchor plate
| D20 | 0.95 | Embedded in concrete as lost part |
